14
EN
cordless grinder PMTS 01-12V
Replacing the collet chuck
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
Note
Never actuate the spindle lock (
1
) button while the tool
is running! This may damage the tool.
Info
If, for example, you would like to use a twist drill bit or
another tool with a different shank diameter than the
last one used, the collet chuck must be changed.
Please proceed as follows:
1. Press the spindle lock (
1
) button and keep it pressed.
2. Slowly rotate the tool holder (
22
) to the locking point until
the locking mechanism is latched.
3. Unscrew the clamping nut (
26
) in counter-clockwise
direction using the wrench (
7
).
1
26
7
4. Remove the collet chuck (
13
) from the collet chuck
holder (
27
).
13
27
5. Insert a collet chuck (
13
) into the collet chuck holder (
27
)
that matches the inserted accessory.
13
6. Screw the clamping nut (
26
) onto the collet chuck holder in
clockwise direction (
27
) and tighten the clamping nut (
26
)
using the wrench (
7
). Then let go of the spindle lock (
1
).
