EN
12
Operating manual – cordless pendulum action jigsaw PJSS 11-20V
3. Turn the quick-release chuck (13) to the side and hold it in
this position.
13
12
4. If a saw blade is inserted, remove the saw blade from the
quick-release chuck.
5. Insert the saw blade into the quick-release chuck. Make
sure that the teeth of the saw blade point to the front and
that the saw blade is seated in the guide roller (12).
6. Push the saw blade into the quick-release chuck up to the
stop. Use a suitable sawblade with single lug shank.
7. Let go of the quick-release chuck.
ð
The quick-release chuck must return to its initial
position.
8. Check whether the saw blade is properly locked in place.
9. Reattach the protective cover (16).
10. Refit the battery (19; see Insert the battery).
