5
EN
Operating manual – Impact drill PHDS 10-230V
Warning
Toxic dusts!
The harmful / toxic dusts produced during operation
pose of risk to the health of the operator and persons
in the vicinity.
Wear eye protection and a dust mask!
Warning
Do not process materials containing asbestos.
Asbestos is considered carcinogenic.
Warning
Make sure not to hit power, gas or water lines when
working with a power tool.
If necessary, use a pipe detector to check the wall you
want to drill in or slit open.
Warning
Risk of injuries caused by flying parts or bursting tool
heads.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The tool holder must be firmly locked in place before
switching the device on, for an insufficiently or
incorrectly clamped accessory could be catapulted out
of the tool holder uncontrollably upon switch-on.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
Caution
Keep a sufficient distance from heat sources.
Notice
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Notice
Only change the rotational direction when the device is
at a standstill! Otherwise the device might be
damaged.
Notice
Only press the lock button when the device is at a
standstill! Otherwise the device might be damaged.
Notice
Only actuate the function selector switch when the
device is at a standstill! Otherwise the device might be
damaged.
Behaviour in the event of an emergency
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
The impact drill
PHDS 10-230V
comes with a drilling setting and
an impact drilling setting.
A function selector switch permits the simple switch-over
between functions.
The infinitely variable impact rate and speed control allows you
to optimally adjust the exertion of force to every application and
material.
The keyless drill chuck with lock function further enables an
easy and tool-free exchange of the insertion tools.
The additional handle, which is rotatable by 360° and lockable,
ensures more stability and safety during the drilling / impact
drilling operation.
The device can be used in continuous operation. Moreover, it
can be used to tighten or loosen screws when using the suitable
tool bits.
