EN
12
Operating manual – Impact drill PHDS 10-230V
Switching continuous operation on and off
When continuous operation is activated, the on/off switch does
not have to be held permanently, which makes working more
comfortable.
1. Proceed as described in the chapter Switching the device
on and off, steps 1 to 5.
2. Press the button for continuous operation (4) with your
thumb until it locks in place completely.
10
4
I.
II.
3. Let go of the on/off switch (10) and continue holding the
device.
ð
The on/off switch is locked in place.
ð
The device keeps running and continuous operation is
activated.
4. Press the on/off switch (10) again to deactivate continuous
operation.
ð
The speed increases briefly.
ð
The button for continuous operation (4) automatically
returns to its initial position.
10
I.
II.
5. Let go of the on/off switch (10) to stop the device.
