8
EN
bench grinding machine PBGS 10-120
Intended use
Only use the device
PBGS 10-120
for:
•
grinding into wood or metal
•
polishing
•
sharpening tools, e.g. knives, scissors, chisels
In combination with the flexible shaft:
•
Milling into wood or plastics
•
For sawing and cutting
– Wood
– Plastics
– Non-ferrous metals
– Fixing elements
(e.g. screws, nails, clamps etc.)
•
For sanding small, dry areas
•
Engraving
– Metal
– Plastics
– Glass
– Ceramics
– Wood
– Leather
•
Polishing
whilst adhering to the technical data.
We recommend using the power tool with original Trotec
accessories.
Foreseeable misuse
Do not use the device for:
•
cutting up tiles
•
sawing large screws or stainless steel
•
Processing workpieces requiring a continuous water
supply
•
drilling into concrete or natural stone
Only use the device in weatherproof surroundings.
Do not use the device in humid or wet rooms and surroundings.
The device is not suitable for commercial continuous use.
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
•
have read and understood the instructions, especially the
Safety chapter.
Personal protective equipment
Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts generated
when processing workpieces.
Wear protective gloves.
They protect your hands from burns, crushing injuries
and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement
hazard posed by rotating parts.
Wear safety boots.
They protect your feet from splintering, falling and
flying pieces which could cause injuries.
Residual risks
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of hot surface
The insertion tool might still be hot after the
application. Burn hazard when touching the insertion
tool.
Do not touch the insertion tool bare-handed!
Wear protective gloves!
