EN
7
cordless angle grinder PAGS 21-115
•
Use extra caution when making a "pocket cut" into
existing walls or other blind areas.
The protruding wheel
may cut gas or water pipes, electrical wiring or objects
that can cause kickback.
Safety Warnings Specific for Polishing Operations
•
Do not allow any loose portion of the polishing bonnet
or its attachment strings to spin freely. Tuck away or
trim any loose attachment strings.
Loose and spinning
attachment strings can entangle your fingers or snag on
the workpiece.
Safety Warnings Specific for Wire Brushing
Operations
•
Be aware that wire bristles are thrown by the brush
even during ordinary operation. Do not overstress the
wires by applying excessive load to the brush.
The wire
bristles can easily penetrate light clothing and/or skin.
•
If the use of a guard is recommended for wire
brushing, do not allow any interference of the wire
wheel or brush with the guard.
Wire wheel or brush may
expand in diameter due to work load and centrifugal
forces.
Device-specific safety warnings for angle grinders
•
Always wear eye protection.
•
During operation hold onto the power tool with both
hands and make sure you stand firmly on the ground.
It is safer to handle the power tool with two hands.
•
For accessories with internal threads such as brushes
and diamond drill bits, observe the max. thread length
of the grinder spindle.
The spindle end must not touch
the bottom of the accessory.
•
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility
company for assistance.
Contact with electrical lines
may result in fire and electric shock. Damaging a gas line
may lead to an explosion. Penetrating a water line causes
property damage and may cause an electric shock.
•
Do not touch the abrasive wheels and cutting discs
until they have cooled down.
The wheels and discs
become very hot during operation.
•
Secure the workpiece.
The grip of tensioning devices or a
vice is more secure than holding the workpiece only by
hand.
•
Store accessories inside buildings in a dry and frost-
free room at consistent temperatures.
•
Remove the accessories before transporting the power
tool.
This way, damages are avoided.
•
Bonded cutting and abrasive discs have an expiry date
after which the discs may no longer be used.
Intended use
Only use the device
PAGS 21-115
:
•
for cutting, grinding and brushing metal as well as stone
materials without the use of water.
•
for cutting tiles and concrete blocks. When cutting stone,
an adequate dust extraction system must be provided.
We recommend using the power tool with original Trotec
accessories.
Foreseeable misuse
•
This power tool is not suitable for operations such as
sandpaper grinding.
•
Do not use accessories that require liquid coolants.
•
Do not use this power tool for processing wood.
•
Do not use this power tool for drilling holes with drill bits.
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
•
have read and understood the instructions, especially the
Safety chapter.
