Trotec IR 2550 S, Operating Manual

Page: 9 / 13

EN 9 radiant heater IR 2550 S / IR 2570 S
Operation
Operating elements
IR 2550 S
/ Level Timer
8
10
9
7
IR 2570 S
8
7
10
9
17
16
No. Designation Meaning
7 Operating light Is permanently illuminated as soon as
the mains cable is connected
Flashes during timer programming
8 Timer button Automatic switch-off timer function in
increments of 1 h up to 24 h
9 Power/Level
button
Switching the device on and off
For selecting the heating level
Button is illuminated when the device is
switched on (only IR 2550 S)
10 Segment display Heating level indication:
P.0 = device in standby mode
P.1 = 850 W
P.2 = 1650 W
P.3 = 2500 W
Indication of the number of hours during
timer programming
16 Heating level
LED
Illuminated when the heating level is
activated
17 Timer LED Illuminated when the timer is activated.
Info
An acoustic signal is emitted each time a setting is
activated.
Remote control
All settings of the device can also be made using the remote
control included in the scope of delivery.
TIMER 2500W
1650W 850W
11
12
13
14
15
No. Designation Meaning
11 Power button Switching the device on and off
12 1650 W button Selecting a heating capacity of 1650 W
13 TIMER button Timer function
Automatic switch-off in increments
of 1 h up to 24 h
14 2500 W button Selecting a heating capacity of 2500 W
15 850 W button Selecting a heating capacity of 850 W
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Switch the mains switch (6) at the rear to position 1 (only
IR 2570 S).
2. Press the Power/Level button (9).
ð
The segment display (10) indicates P.0 .
ð
The device is now in standby mode.
3. Press the Power/Level button (9) again to set the desired
heating level.
ð
The selected heating level flashes in the segment
display (10).
ð
The LED heating level (16) is illuminated (IR 2570 S).