background image

EN

11

radiant heater IR 2550 S / IR 2570 S

The device does not respond to the infrared remote control:

Check whether the distance between remote control and
device is too large and reduce it if necessary.

Make sure there are no obstacles, such as furniture or
walls, between the device and the remote control. Ensure
visual contact between device and remote control.

Check the charging status of the batteries and change
them if required.

If the batteries have just been changed, check them for
correct polarity.

Note

Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.

Your device still does not operate correctly after these
checks?

Please contact the customer service. If necessary, bring the
device to an authorised specialist electrical company or to
Trotec for repair.

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

Switch the device off.

Hold onto the mains plug while pulling the power cable out
of the mains socket.

Allow the device to cool down completely.

Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.

Cleaning the device

Warning of electrical voltage

Never immerse the device in water!

Warning of hot surface

Do not touch the reflector or the heating rods with bare
hands.

Clean the device with a soft, damp and lint-free cloth. Ensure
that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Wipe the housing dry after cleaning.
Dirt on the heating rods should be removed with a long brush
with soft bristles.

Technical annex

Technical data

Parameter

Value

Value

Model

IR 2550 S

IR 2570 S

Heating capacity

850 / 1650 /
2500 W

850 / 1650 /
2500 W

Power supply

220 – 240 V / 50 Hz 220 – 240 V / 50 Hz

Plug type

CEE 7/7

CEE 7/7

Protection class

IP 20

IP 34

Dimensions (depth x
width x height)

90 x 870 x 190 mm 90 x 900 x 200 mm

Minimum distance
to walls and other
objects:

top (A):

bottom (B):

sides (C):

front:

70 cm
180 cm
100 cm
100 cm

70 cm
180 cm
100 cm
100 cm

Weight

3 kg

3 kg

Summary of Contents for IR 2550 S














Reviews: