EN
9
radiant heater IR 2010 / IR 3010
Operation
Note
Please use a safety fuse (overcurrent protection device)
or a type C circuit breaker.
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Set the on/off switch (1) to
I
.
ð
The device is switched on.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch the device off by setting the on/off switch (1) to the
0
position.
•
Allow the device to cool down completely.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Storage chapter.
