8
EN
radiant heater IR 2010 / IR 3010
7. Make sure that the device is attached securely.
8. Tilt the device to the desired angle. The device can be
tilted upwards and downwards by 60°.
Use the Allen wrench to fix the inclination angle.
60°
Start-up
Note
Please use a safety fuse (overcurrent protection device)
or a type C circuit breaker.
Note
Current peaks in the millisecond range may occur
temporarily during switch-on of the device. With an
output of up to 3,000 watts, this may cause
category 16A-B circuit breakers to trigger and to
become defective in the long run.
If necessary, have the fuses replaced by a specialist
electrical company.
Info
Odours might arise upon initial start-up or after a
longer period of non-use.
•
Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
•
Do not create tripping hazards when laying the power
cable or other electric cables, especially when positioning
the device in the middle of the room. Use cable bridges.
•
Make sure that extension cables are completely unrolled.
•
Make sure that there are no curtains or similar objects in
the immediate vicinity.
Connecting the power cable
•
Insert the mains plug into a properly secured mains
socket.
•
Make sure that the power cable is guided along the back
of the device. Never guide the power cable along the front
of the device!
