background image

Operating manual – IDS 100

EN

B-1

Table of Contents

1.  Notes on how to use the manual.............................................. A-1

Legend  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

2.  Scope of delivery ..................................................................... A-1
3.  Guarantee provisions ............................................................... A-1
4.  General safety instructions ...................................................... A-2
5.  Function and product characteristics ....................................... A-2
6.  Technical data ......................................................................... A-2

Fuels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

7.   Proper and improper use ......................................................... A-3

Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Improper use   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

8.  Installation conditions .............................................................. A-3
9.  Description of device ............................................................... A-3

Oil heating unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

10.  Installation and commissioning ................................................ A-4
11.  Exhaust system ....................................................................... A-4

Chimney duct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Wall duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

12.  Functions and operation .......................................................... A-4

Switching on the oil heating unit  . . . . . . . . . . . . . . . . . . . . A-4
Switching off the oil heating unit . . . . . . . . . . . . . . . . . . . . A-5
Resuming operation after a failure   . . . . . . . . . . . . . . . . . . A-5
Safety equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

13.  Transport ................................................................................. A-6
14.  Care and maintenance ............................................................. A-6

Cleaning after every 50 operating hours  . . . . . . . . . . . . . . A-6
Cleaning the oil heating unit . . . . . . . . . . . . . . . . . . . . . . . . A-6

15.  Disposal .................................................................................. A-6

Oil heating unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
Heating oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

16.  Service and repair ................................................................... A-6
17.  Troubleshooting ....................................................................... A-6
18.  Appendix ................................................................................. A-9

Circuit diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9
Setting of the air setting ring  . . . . . . . . . . . . . . . . . . . . . . . A-9

1. Notes on how to use the manual

This operating manual contains all important information required for a 
safe commissioning and use of your oil heating unit.
It provides you with support for operating the device and remedying pos-
sible  problems  as  well  as  with  information  on  disposal  and  customer 
service.
Please read this manual thoroughly and completely before using the oil 
heating unit for the first time. 
Please store this operating manual and keep it within reach in order to 
consult it if necessary. 
Please observe all safety instructions and information on use and main-
tenance contained in this manual. 
This manual should be attached to the device if the latter is made avail-
able to other persons for use.

Legend

WARNING  SYMBOL. This  symbol  is  followed  by  a 
hazard warning which contains instructions whose 
non-compliance may cause serious injuries and/or 
death and/or property damage. 

Additional information which might be helpful when 
using the device. 

2. Scope of delivery

The scope of delivery of the oil heating unit includes: 

T

RT

-BA-IDS1

0

0

-RE

-00

1

-INT

IDS 100

1

2

4

3

9

17

10

11

16

15

14

13

12

6

7

5

8

1  Operating manual 

10  Wheel 2x

2  Assembly instruction manual  11  Locking pin 2x
3  Oil heating unit ISD 100 

12  Spacer ring 2x

4  Chimney connection 150 mm  13  Hexagon nut 4x
5  Handle 

14  Hexagon screw 4x

6  Support 

15  Screw 4x

7  Hexagon nut 4x 

16  Outlet cone

8  Hexagon screw 4x 

17  Assembly tools

9  Support bracket for axis

3. Guarantee provisions

The  warranty  period  granted  for  the  oil  heating  unit  IDS  100  shall  be 
12 months.
Any damage to the device resulting from non-compliance with the in-
structions contained in this manual shall be excluded from the guarantee.
The  manufacturer  shall  assume  no  liability  for  damages  to  the  device 
and/or its accessories that are caused by unauthorised modifications.
For  any  further  terms  of  guarantee,  please  refer  to  the  General Terms 
and Conditions (GTC), which are available on our website: www.trotec.de. 

Summary of Contents for IDS 100













Reviews: