manualshive.com logo in svg

Trotec BT22WP, Operating Manual, Page: 6 / 14

Share
Download
Trotec BT22WP Operating Manual Download Page 6

6

EN

smartphone-controllable thermometer BT22WP

MultiMeasure Mobile app

Install the Trotec MultiMeasure Mobile app on the terminal
device you want to use in combination with the device.

Info

Some of the app's functions require access to your
location and an active Internet connection.

The app is available for download in the Google Play Store as
well as in Apple's app store and via the following link:

https://hub.trotec.com/?id=43083

Start-up

Info

Allow for an acclimatization period of about 10 minutes
in the respective measuring environment prior to the
appSensor's measuring operation.

Connecting the appSensor

Info

The app can simultaneously be connected to several
different appSensors or appSensors of the same type
and also record several measurements at the same time.

Proceed as follows to connect the appSensor to the terminal
device:

ü

The Trotec MultiMeasure Mobile app is installed.

ü

The Bluetooth function on your terminal device is activated.

1. Start the Trotec MultiMeasure Mobile app on the terminal

device.

2. Briefly actuate the 

On / off / measurement

 button (3) three

times to switch on the appSensor.

ð

The LED (2) flashes yellow.

3. Press the 

Sensors

 button (6) on the terminal device.

ð

The sensors overview opens.

4. Press the 

Refresh

 button (7).

ð

If the scanning mode was not active before, the colour
of the 

Refresh

 button (7) will change from grey to black.

The terminal device now scans the surroundings for all
available appSensors.

5. Press the 

Connect

 button (8) to connect the desired sensor

to the terminal device.

ð

The LED (2) flashes green.

ð

The appSensor is connected to the terminal device and
starts measuring.

ð

The on-screen display changes to the continuous
measurement.

Sensors

BA16WP

BM22WP

BM31WP

BP21WP

BA30WP

SENSORS

MEASUREMENTS

REPORTS

CUSTOMERS

SETTINGS

Connect

Active sensors nearby

Available sensors

8

7

6

BT22WP

No. Designation

Meaning

6

Sensors

 button

Opens the sensors overview.

7

Refresh

 button

Refreshes the list of sensors near the
terminal device.

8

Connect

 button

Connects the displayed sensor to the
terminal device.

Summary of Contents for BT22WP















Reviews:

No comments