Trotec BT22WP Operating Manual Download Page 4

4

EN

smartphone-controllable thermometer BT22WP

Warning

The device is not a toy and does not belong in the
hands of children.

Warning

Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!

Caution

Keep a sufficient distance from heat sources.

Note

To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.

Note

Do not use abrasive cleaners or solvents to clean the
device.

Information about the device

Device description

Used in combination with Trotec's MultiMeasure Mobile app the
thermometer permits air temperature measurements.
In case of individual measurements, the measurement value
display can be refreshed both via the app and by a brief
actuation of the measurement button at the measuring device.
Apart from the hold function, the measuring device can indicate
minimum, maximum and average values and carry out series
measurements.
In the app you can specify MAX and MIN alarm thresholds for all
parameters measured with the device.
The measurement results can be displayed and saved on the
terminal device either numerically or in form of a chart. Then,
the measurement data can be sent in PDF or Excel format.
The app also includes a report generation function, an organiser
function, one for customer management and further analysis
options. Moreover, it is possible to share measurements and
project data with colleagues in another subsidiary. If
MultiMeasure Studio Professional is installed on a PC, you can
even use report templates and ready-made text blocks for
various fields of application to turn the data into professional
reports.

Device depiction

1

2

3

4

5

No.

Designation

1

Measuring sensor

2

LED

3

On / off / measurement

 button

4

Battery compartment with cover

5

Lock

Technical data

Parameter

Value

Model

BT22WP

Temperature

Measuring range

-50 to 150 °C

Accuracy

±1 °C

Measuring range resolution

0.1 °C

General technical data

Bluetooth standard

Bluetooth 4.0, Low Energy

Transmission power

3.16 mW (5 dBm)

Radio range

approx. 10 m
(depending on measuring
environment)

Operating temperature

-20 to 50 °C, < 80 % RH

Storage temperature

-10 to 60 °C, 10 to 90 % RH

Power supply

3 x 1.5 V battery AAA

Device switch-off

after approx. 3 minutes without
active Bluetooth connection

Type of protection

IP40

Weight

90 g (incl. batteries)

Dimensions 
(length x width x height)

220 mm × 38 mm × 23 mm

Summary of Contents for BT22WP















Reviews: