6
EN
vane anemometer controlled via smartphone BA16WP
MultiMeasure Mobile app
Install the Trotec MultiMeasure Mobile app on the terminal
device you want to use in combination with the appSensor.
Info
Some of the app's functions require access to your
location and an active Internet connection.
The app is available for download in the Google Play Store as
well as in Apple's app store and via the following link:
https://hub.trotec.com/?id=43340
Start-up
Info
Allow for an acclimatization period of about 10 minutes
in the respective measuring environment prior to the
appSensor's measuring operation.
Proceed as follows to start up the appSensor:
1. Remove the protective cap from the device.
ð
The air circulates freely around the measuring sensor
ensuring precise measurements.
BA16WP
BA16WP
BA16WP
I.
II.
Connecting the appSensor
Info
The app can simultaneously be connected to several
different appSensors or appSensors of the same type
and also record several measurements at the same
time.
Proceed as follows to connect the appSensor to the terminal
device:
ü
The Trotec MultiMeasure Mobile app is installed.
ü
The Bluetooth function on your terminal device is activated.
1. Start the Trotec MultiMeasure Mobile app on the terminal
device.
2. Briefly actuate the
On / off / measurement
button (3) three
times to switch on the appSensor.
ð
The LED (2) flashes yellow.
3. Press the
SENSORS
button (6) on the terminal device.
ð
The sensors overview opens.
4. Press the
Refresh
button (7).
ð
If the scanning mode was not active before, the colour
of the
Refresh
button (7) will change from grey to black.
The terminal device now scans the surroundings for all
available appSensors.
5. Press the
Connect
button (8) to connect the desired sensor
to the terminal device.
ð
The LED (2) flashes green.
ð
The appSensor is connected to the terminal device and
starts measuring.
ð
The on-screen display changes to the continuous
measurement.
Sensors
BC21WP
BA16WP
BM22WP
BM31WP
BP21WP
BA30WP
Sensors
MEASUREMEN
TS
Reports
CUSTOMERS
SETTINGS
Connect
Active sensors nearby
Available sensors
8
7
6
No. Designation
Meaning
6
SENSORS
button
Opens the sensors overview.
7
Refresh
button
Refreshes the list of sensors near the
terminal device.
8
Connect
button
Connects the displayed sensor to the
terminal device.
