EN
7
humidifier B 5 E
4. Unscrew the lid (15) from the water tank (2).
15
8
5. Fill fresh drinking water (approx. 4 l, maximally 40 °C) into
the water tank.
6. Insert the SecoSan
®
Stick (optional accessory) (7) into the
water tank (1).
7. Screw the lid (15) firmly back onto the water tank (2).
8
8. Refit the mist nozzle (14) onto the water tank (2).
14
9. Refit the water tank (2) into the device.
ð
In doing so, make sure that the arrow points to the
front.
ð
Please note that after inserting the water tank, the
water starts to run into the lower part of the device
immediately.
10. Set the device up in an upright and stable position.
ð
If the device is not positioned upright, the water inside
the device will be discharged from the device via the
overflow (7).
