EN
11
humidifier B 5 E
Note regarding automatic switch-off:
•
Pressing the
On/Off
button (27) deactivates the automatic
switch-off function.
•
Changing the operating mode deactivates automatic
switch-off.
•
If you select 0 hours, the automatic switch-off will be
deactivated.
•
The timer stops when the empty water tank indication (21)
lights up. The timer continues to run as soon as the water
tank is full again.
Switching illumination on or off
The water tank can be additionally illuminated by 4 blue LEDs in
the lower part of the device.
1. Press the
Light
button (24) to switch the illumination on or
off.
Switching ionization on or off
Ionization can be switched on as needed. The device will then
release ions for additional air purification. The released ions
remove pollen, dust, viruses and bacteria from the room air.
Ionization can be switched on in any operating mode.
1. Press the
Ionizer
button (28) to switch ionization on or off.
ð
When ionization is activated, the
ion
indication (22) will
be shown on the display.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Empty the water tank.
•
Empty the lower part.
•
Use a cloth to wipe all parts of the device dry.
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the operating manual.
Using insertion tools or accessories other than those
specified in the operating manual may cause a risk of
injury.
Designation
Article number
SecoSan
®
Stick 10
6.100.004.110
