8017 Trotec Speedy
300 fiber
OPERATION
28/07/2015
Trotec Produktions- und Vertriebs GmbH
_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
39 / 54
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, mailto:
Mounting the work piece:
4.
Before you mount the object into the rotary attachment, measure the diameter of the
object at the position to be processed with a sliding caliper or a similar tool. Write
down this value.
5.
Adjust the height by loosening and fixing of lever 1 and screw 2 to make the work
piece fitting into the rotary attachment.
6.
When using a rotary attachment with cones, fix the slider of the rotary with lever 3
until the work piece is fixed between the two cones. When using a rotary attachment
with rolls, adjust the slider of the rotary with lever 3 until the work piece fits on it, and
then place the work piece on the rolls.
7.
Now check if the work piece is horizontal and, if necessary, adjust the level by lever
1 on the right side or lever 4 or screw 2 on the left side.
8.
Now switch on the laser and wait until the referencing is finished. Position the
working head over the object at the position, where you want to process. Now focus
2
4
3
1
2
4
3
1
Note:
Depending on date of
manufacturing the inside-
and outside cones might
be exchanged
