EN
Operating manual – Videoscope VSC3008
4
Carefully read the operating manual before using the device
and keep it within reach!
• Do not use the device in atmospheres containing sulphur,
chlorine or salt.
• Protect the device from permanent direct sunlight.
• Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
• Do not open the device with a tool.
• Observe the storage and operating conditions (see chapter
Intended use
Only use the device for the visualization of objects. To use the
device for its intended use, only use accessories and spare parts
which have been approved by Trotec.
Improper use
Do not use the device in potentially explosive areas. Do not use
the control unit with display underwater. Never use the device on
persons or animals. Trotec accepts no liability for damages
resulting from improper use. In such a case, any warranty claims
shall expire. Any unauthorised modifications, alterations or
structural changes to the device are forbidden.
Personnel qualifications
People who use this device must:
• have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Danger!
Keep a sufficient distance from heat sources.
Danger!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Danger!
The device is not a toy and does not belong in the hands
of children.
Danger!
This device can be dangerous if it is used by untrained
people in an unprofessional or improper way. Observe the
personnel qualifications.
Caution!
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Caution!
Do not use abrasive cleaners or solvents to clean the
device.
Safety
