8
EN
oxygen regenerator Zerozon 200
Operation
Note
Avoid open doors and windows.
Operating elements
3
17
18
19
4
Timer switch
23
20
21
22
No.
Designation
Description
3
Operating hours
counter
Indicates the total operating hours
4
Timer switch
Setting the treatment duration:
0 – 100 hours
(ozone generation begins 1 minute
after activation)
17
Man.
button
-starts the manual oxygen
regeneration
- illuminated when the device is in
operation
18
On/Off
button
- for switching the device on and off
- is illuminated when the device is
switched on
No.
Designation
Description
19
Airozon
Operating
LED
Is illuminated when the connected
ozone generator is supplied with
power
20
PROG
button
Selecting the setting mode and the
individual display indications
21
RESET (+)
button - reset to start time of timer
- (
+
) selection mode = increase time
22
START/
STOP (-)
button
- starting and stopping the timer
(
-
) selection mode = decrease time
23
Display
- indicates the set time of the timer
(hours:minutes seconds)
- bell symbol flashes when timer
expires
Warning
Risk of injury caused by ozone!
Exit the room as soon as you have switched the device
on so as to prevent contact with ozone.
Warning
Risk of injury caused by inhalation of ozone!
The following symptoms could be indicative of
poisoning or an irritation caused by ozone:
- eye irritations – conjunctivitis, stinging and watering
eyes
- strong urge to cough
- shortness of breath – chest tightness
- pain while inhaling
- dizziness, light-headedness
- headache
- feeling of faintness
Exit the room to be cleaned immediately after the
device has been switched on.
Do not enter the room whilst the air purification is in
progress.
Should you experience one or more of the above
symptoms relating to the use of the odour neutraliser,
seek medical treatment immediately!
Switch-on / switch-off
If possible, set up the device with a Trotec ozone generator in
the room to be treated. The two devices can be connected and
then started one after the other (see Use in combination with an
ozone generator).
To switch the device on or off without the ozone generator,
please proceed as follows:
1. Press the
On/Off
button (
18
).
2. Press the
Man.
button. (
17
).
ð
The device starts the oxygen regeneration process.
3. Press the
On/Off
button (
18
) again to switch the device off.
