9-6. To set up remote for #2 Fan
Disconnecting wire from #1 Fan
Disconnect the Black wires from #1 Fans and connect the Black wires back to #2 Fan that you remove from
9-4.
*See the remote control setting process for
9-5 to set up #2 Fan.
#2 Fan
is ready for setting
Outlet Box
#1 Fan
(Disconnecting)
Mounting Bracket
Turn on power at breaker box and #2 Fan is ready for setting.
OFF
OFF
OFF
ON
Outlet Box
Mounting Bracket
#2 Fan
P9
1. Switch off the main power and make sure fan has completely stopped .
2. Switch on the power again, and immediately.
This process must be done within 20 seconds after switching on the power.
This fan has completed the settings successfully and
is ready for operation!
#1 Fan
Press and hold the Fan On/Off button
for
8 seconds until the Receiver “Long Beeps”.
OF
F
OF
FO
FF
OFF
9-5. RESETTING Process for receiver and transmitter:
Make sure to turn off power at breaker box.
OF
F
OF
FO
FF
OFF
