Tropos 5210 MetroMesh Router Installation Guide
84
3.
Run the stripped part of the cable through the cable gland (
Figure 37
). Make sure that the
braided conductive shield of the cable makes contact with the conductive contacts of the
cable gland (
Figure 37
).
4.
Attach the cable gland by first tightening the gland base into the access cover. Then tighten
the gland cover to constrict the weather-tight grommet around the outer jacket of the cable,
thereby creating a weather-tight fitting.
Figure 37 Cable Gland Assembly
5.
Apply a RJ45 modular jack and connect to the LAN or Management port.
Figure 37
shows
the termination options, and
Table 30
provides pin descriptions.
Figure 38 Cable Preparation and Termination
trp_123a
Accessory connector
access cover
Finished installation
Gland cover
then tightened
over cable
Cable gland
base tightened first
to cover
Weather-tight
grommet
trp_109
Category 5 cable
RJ45 port
RJ45 jack
8
1
2
3
4
5
6
7
Brown
Orange/white
Orange
Green/white
Blue
Blue/white
Green
Brown/white
1
8 7 6 5 4 3 2
7
6
8
5
4
3
2
1
