Tropos 5210 MetroMesh Router Installation Guide
81
Figure 35 Cable Connections
6.
Attach the access cover by tightening the 6 screws. Check that the cable gland is securely
tightened.
7.
Secure the weatherproof cable to the canopy bracket with two cable ties (
Figure 34
). Use
two additional cable ties to anchor the cable to the bottom of the 5210 unit (
Figure 35
). Refer
to
Table 29
for canopy cable wiring information.
trp_122a
Connector
access cover
Tighten six screws to
fasten access cover
Watertight access cover
cable glands
Cable terminated
with RJ45 jack
for port connection
Shield
termination
Cable from radio
Management
port
LAN
port
Screw holes
for access cover
Cable ties
Drip loop
