Connecting a Data Port
Tropos 5210 MetroMesh Router Installation Guide
36
Figure 22 Connecting Hybrid Fiber Coax Power
Connecting a Data Port
The Tropos 5210 MetroMesh router is equipped with two Ethernet ports that support RJ45
connectors.
Note
The Tropos 5210 MetroMesh router is shipped pre-configured. For post-installation changes
in configuration, you can communicate with the router by way of its wireless connection. For
more information, see the
Tropos Networks Configuration Guide
.
Note
Only use shielded Cat5 cable rated for outdoor use. For protection against risk of fire,
electrical hazard and to ensure the reliable operation of this equipment, the shields of the
Cat5 cable must be properly terminated and bonded to the unit and to the protective earth
(PE) at the building entrance.
Note
National Electrical Codes (NEC) Article 800 requires the use of Agency Listed (UL/CSA)
Building Entrance Protector for all power and communications cables entering a building. The
NEC intends by Article 800 to protect the building and occupants from fires caused by
transient voltage and current surges.
trp_148
Strand mount
bracketry
Drip loop
40-90 V~, 50-60 Hz, 2.2 A power
on co-ax cable
from power tap
