TRONXY XY-2 PRO User'S Manual & Installation Manual Download Page 2

Page: 2 / 20

Attention

After receiving the package, please check the
accessories according to the packing list. If
you have any questions, please contact
customer service.

Please use the machine in a ventilated, dry,
clean and flat environment

The machine contains high speed moving
parts and high temperature parts. Children
are not allowed to use the machine without
permission

Part of the accessories are consumable,
the warranty period is different

It is not recommended to use this machine
when unattended

Do not refit or disassemble the core parts
of the machine without permission

Relevant information is stored in
SD card, please check

Note: please make sure the voltage of the power supply is
consistent with the voltage in the area before printing.If
not, please turn the 110V-220V switch on the power
supply.

Summary of Contents for XY-2 PRO





















Search results

Summary of Contents for XY-2 PRO

Reviews:

Related manuals for XY-2 PRO

Brands by name

Popular brands

TRONXY XY-2 PRO, User'S Manual & Installation Manual

Search results

Summary of Contents for XY-2 PRO

Reviews:

Related manuals for XY-2 PRO

Brands by name

Popular brands