TRONXY XY-2 PRO, User'S Manual & Installation Manual

Page: 16 / 20

2. The contents of the SD card cannot be read
1
）
Check the card reader if damage.
2
）
If the connect computer show empty, please format the SD
card and try again.
3
）
Check whether the SD card is inserted into the socket correctly.
4
）
The filename has an illegal character, please rename it.
5
）
Please replace the damaged SD card and try again.
3. if the print head does not produce enough material
or does not produce enough material
1
）
Check whether the print head temperature have not reached
200
℃
above (PLA), led to consumable cannot squeeze,
waiting for the temperature rises to the set target.
2
）
Check whether the filaments are knotted, which leads to
unsmooth feeding.
3
）
Check whether the filaments or pipes are not inserted in place,
resulting in the failure of feeding.
4
）
Check whether the temperature of the print head is too high,
which leads to excessive softening of filaments and can't be
extruded normally.
5
）
Check whether the diameter of filaments is inconsistent with
the diameter set in the slicing software, so that the amount of
extrusion filaments is not enough.
6
）
Check whether the consumables are blocked by dirt or nozzle
blocked during extrusion.
7
）
Replace with better quality filaments.
1. Machine cannot start
1
）
Check the power line and other wires connect correct or not.
2
）
Check whether the supply voltage matches the local standard.
3
）
Check whether the screen or power supply is damaged and
replace in time.
4
）
Check the wires if damage or breakage.
5
）
Check whether the power fuse is burnt out.
8. Failure cause analysis
14