1. Pass the belt through the gear as shown, press the pulley plate
against the motor bottom plate, fasten the lower end of the sheet
metal groove of the print head assembly with the tie belt, as
shown in the figure. After adjusting the spacing between the motor
gear and the belt, lock the 2 meter screws on the gear.Loosen the
motor baseplate screw, pull the motor assembly outward, tighten
the belt (do not force too much), and lock the screw.
2. Pass the belt through the gear as shown, press the pulley plate
against the motor bottom plate, fasten the lower end of the sheet
metal groove of the print head assembly with the tie belt, as
shown in the figure. After adjusting the spacing between the motor
gear and the belt, lock the 2 meter screws on the gear.Loosen the
motor baseplate screw, pull the motor assembly outward, tighten
the belt (do not force too much), and lock the screw.
Step 5
：
Assemble belt
Assemble parts specifications and quantity
：
Main frame 1pc
Belt 2pcs
Tie 4pcs
