Note: Please assemble it after wiring . Do not touch the
electronic component by hand for avoiding static electricity.
1.Use 3 PM4*6 screws and 3 T nuts to tighten according to the
map position.
3.Take the power supply module, use 3 PM4*8 screws and 3 hull nuts,
and tighten according to the map position.
2.The main board components are loaded into the lower right
corner of the machine, and are fixed in aluminum grooves with T
nuts.
4.Load the power assembly into the lower right corner of the
machine, and use the T nut to fix it in the aluminum slot.
Screw PM4*6 3pcs
Screw PM4*8 3pcs
Step 10
：
Assemble electronic board and power supply
Assemble parts specifications and quantity:
Main frame 1pc
Power supply component 1pc
electronic board and touch-screen component 1pc
T nut M4 6pcs
