Page
3
of
9
1. Structure
1
140° wide angle glass lens
6
Battery charging status LED
2
Microphone
7
Micro USB
3
Status indicator LED (red, green, blue)
8
Reset button
4
Shutter button
9
Micro SD card slot
5
Power-on/off &Mode switching button
10 Integrated tripod socket
2. Power-on/off
2.1 Power-on
Shortly press the power button, release it when you see the indicator LED flashes in red, and hear a beep at
the same time (the buzzer should be on), when the LED remains in green, the camera is in standby mode.
2.2 Power-off
Long press the power button, and then release it when the indicator light is off.
2.3 Automatic power-off
The camera will save files and turn off automatically under the following circumstances:
a. When user takes videos without enough power, there will be 3 beeps from the buzzer, files will be saved
automatically, and then it will be power-off automatically.
b. Under standby condition, without any operation in 3 minutes.
c. When micro SD card is full and the loop recording function is off, it will be automatically power-off after 3
minutes.
2.4 Power-off delay
The camera supports the power-off delay function. User can switch it among off/10 second/30 second via the
configuration software.
When the external power was disconnected suddenly, if this function is on, there will be 10 or 30 seconds
power-off delay. If you connect the camera to the external power supply again within the 10 or 30 seconds,
the camera will keep power-on. Otherwise, the camera will be automatic power-off after 10 or 30 seconds.
Note: The power-off delay function doesn’t work while the camera is disconnected from the computer USB
interface.
