Page
5
of
9
5. Taking video/photo while charging
This camera supports taking videos/photos while charging via a 5V, 1A output AC adaptor, which mainly enables
user to record long videos via an external power supply.
5.1 The auto-record function is on
The camera will be turned on and start to taking videos automatically under the default mode. To stop
recording and start to use other function, press the shutter button once.
5.2 The auto-record function is off
User needs to press the shutter button manually to take a video. The functions like mode switching, photo
shooting are same as no-charging condition.
Note: This camera does not support this function via connecting to the computer USB port!
6. G-sensor
6.1 Image rotation
The camera has a G –sensor for image rotation, user can change the configuration via software.
a. Auto
No matter the camera is upright or inverted (upside down), the image will be always upright, and even you
turn over the camera during recording in any mode.
b. 0°
If the camera is inverted, the image will be inverted (180° rotated), too.
c. 180°
Even if the camera is inverted, the image will be upright. But the image will be 180° rotated when the camera
is upright.
6.2 Anti-shock file protection
The camera will automatically generate four folders in the micro SD card, “Video”, “JPEG”, “T-lapse” and
“Event”. While the camera (for example, used as a car DVR) is recording, then there comes an impact to it
suddenly, the camera will save the whole recording file that includes the impact to the “Event” file folder.
Files in the “Event” folder will be protected.
Note: User can adjust the G-sensor sensitivity (off/low/medium/high) via the configuration software.
7. Charging
The camera has a built-in polymer rechargeable battery. Please charge the battery before you use it at first time.
7.1 Charge condition: 5.0VDC
1A.
7.2 Plug the small end of the USB cable into the micro USB port on the camera. And connect the large end to an
available USB port on your computer or adaptor.
7.3 Full charging time via USB 2.0: It takes about 2 hours from a fully discharged battery while the camera is
power-off. The camera will be automatically power-on when the USB is connected to the power supply, if you
just want to charge the battery, please long press the power button to turn off the camera for saving charging
time.
7.4 When charging, the indicator LED at the bottom of the device will be in red, when the battery is full, the LED
will be off.
7.5 Charging via AC adaptor while recording video at the same time takes about 5 hours to fully charge the
completely discharged battery.
Note: Please do not leave the camera unattended while it is charging.
