background image

Model:  K-3864 

2 ¼" Load Alarm Kit 

 

06/2004 

 Rev. OR 

- 7 - 

 
12.0 

IN-SERVICE SUPPORT 

Contact Tronair for technical services and information. 

 
13.0  GUARANTEES/LIMITATION OF LIABILITY 

Tronair products are warranted to be free of manufacturing or material defects for a period of one year after shipment to 
the original customer. This is solely limited to the repair or replacement of defective components. This warranty does 
not cover the following items: 

a)  Parts required for normal maintenance 
b)  Parts covered by a component manufacturers warranty 
c) 

Replacement parts have a 90-day warranty from date of shipment 

If you have a problem that may require service, contact Tronair immediately. Do not attempt to repair or disassemble a 
product without first contacting Tronair, any action may affect warranty coverage. When you contact Tronair be 
prepared to provide the following information: 

a)  Product Model Number 
b)  Product Serial Number 
c) 

Description of the problem 

If warranty coverage is approved, either replacement parts will be sent or the product will have to be returned to Tronair 
for repairs. If the product is to be returned, a Return Material Authorization (RMA) number will be issued for reference 
purposes on any shipping documents. Failure to obtain a RMA in advance of returning an item will result in a service 
fee. A decision on the extent of warranty coverage on returned products is reserved pending inspection at Tronair. Any 
shipments to Tronair must be shipped freight prepaid. Freight costs on shipments to customers will be paid by Tronair 
on any warranty claims only. Any unauthorized modification of the Tronair products or use of the Tronair products in 
violation of cautions and warnings in any manual (including updates) or safety bulletins published or delivered by 
Tronair will immediately void any warranty, express or implied. 
 
The obligations of Tronair expressly stated herein are in lieu of all other warranties or conditions expressed or implied. 
Any unauthorized modification of the Tronair products or use of the Tronair products in violations of cautions 
and warnings in any manual (including updates) or safety bulletins published or delivered by Tronair will 
immediately void any warranty, express or implied 
and Tronair disclaims any and all liability for injury 
(WITHOUT LIMITATION and including DEATH), loss or damage arising from or relating to such misuse
. 

 

Summary of Contents for K-3864












Reviews: