Trojan X-TRAINER 400, Care Instructions And Assembly Manual

Page: 8 / 24

1480-8
ASSEMBLY STEPS
STEP 05
Install Left And Right Pedal Tube
s!TTACHTHEENDOF2IGHT0EDAL4UBE ONTOTHE#ROSS&RAME ANDTIGHTENITWITH3CREW 7ASHER AND
Spring Washer (6) at the Cross Frame (22) firmly.
s!TTACH3AFE#OVER ONTOTHE3WIVEL4UBE REATTACHTHESWIVELTUBE ONTOTHE2IGHT(ANDLEBAR AND
tighten it with Screws (12), Spring Washer (6) and Washer (27).
s)NSTALLTHE,EFT0EDAL4UBE ASDESCRIBEDABOVE
STEP 06
Installation of the Right (34) and Left (28) Pedal on the
Pedal Tubes (21 and 24).
s0LACETHE0EDAL ONTOTHE0EDAL4UBE SOTHATTHEHOLESONTHE
Pedal(34) are aligned with one of the possible installation positions on
the Pedal Tube (24).
Note. The high lip on the long side of the pedal must point inwards
towards the main frame(l).
s0UTONE7ASHER ONEACH#ARRIAGE"OLT ANDPUSH
through the holes from the top and fasten from the bottom with a
Washer (3 L), Spring Washers (32) and the Knob Dial (33).
(Note. The position adjusted in this way should always be equal at both
sides. The positions can be changed as desired at all times by removing the
carriage bolts (30) and sliding the pedal on the pedal brackets.)
s)NSTALLTHE,EFT0EDAL ASABOVE