Trojan X-TRAINER 400, Care Instructions And Assembly Manual

Page: 18 / 24

1480-18
8. FREQUENTLY ASKED QUESTIONS
Q1. My elliptical does not move as easily as indicated in manual
1. Ensure you have placed the stabilizer with the wheels in the front of the unit.
Q2. My consol does not work?
1. Make sure you have connected it correctly and have placed the batteries in the consol.
Q3. My consol is not clear and appears faded?
1. Ensure your unit is not in direct sunlight and you have removed the plastic cover from the screen.
If display does not improve, please contact 0861 876 526
Q4. My tension control is not working?
1. Ensure the cable has been connected correctly
Q5. My pedals are not fitting properly?
1. Make sure you have inserted them on the correct side of the unit. Each pedal is marked L or R.
Q6. I cannot thread the main cable through the upright bar?
1. Use the thin wire provided or a piece of string to assist you.
Q7. My consol is showing an “E1” error message
1. Make sure you are holding the pulse pads correctly during use.
Q8. My consol is showing an ‘E2’ error
1. The computer cable cannot be detected, please check if the cable has been connected properly
Q9. My consol is showing an ‘E4’ error
1. Body fat reading has exceeded the pre-programmed limit ( upper limit 50%; lower limit 5%)
Please re-enter your age, weight and height on the computer and resume training.
If this does not solve the problem please contact 0861 876 526.