Trojan STAMINA 320, User Manual

Page: 13 / 25

13
FUNCTION BUTTON:
MODE:
Press this button to select the training mode. There are 12 built-in programs
and a HRC program. The pre-set time for each built-in program is
30 minutes.
START/STOP:
Press this button to start the operation of the Trojan Stamina 320
Treadmill, with the starting speed at 1.0 km/h. Press it again to stop and
the Trojan Stamina 320 Treadmill speed will gradually slow down until a full
stop.
CLEAR/SET:
Pressing this button resets TIME, DISTANCE and CALORIE when the Trojan
Stamina 320 Treadmill is not moving. When in the specific training mode,
press this button to set parameters TIME, DISTANCE or CALORIE. Although
all 3 parameters can be set, only the last parameter set is accepted in
the normal mode PO. For instance, if TIME is first set and then DISTANCE,
only the DISTANCE parameter is accepted once the program starts. The
parameter TIME will be overridden by DISTANCE as it was the last selected
parameter.
SPEED:
Pressing the SPEED button “UP
↑
” or ”DOWN
↓
’ increases or decreases the
speed to the desired speed.
INCLINE:
Pressing the INCLINE button “UP
↑
” or ”DOWN
↓
” increases or decreases the
desired incline level.
CONSOLE FUNCTIONS