Trojan STACK 680, Care Instructions And Assembly Manual

Page: 8 / 18

11485AU-8
ASSEMBLY STEP
STEP 01
Assembly of the base frame and weight stack
Step 1 Screw T-Tube (2) and Horizontal Beam (3), secure them with two 3/8”x 4” Bolts (51), four 3/8”x19mm
Washer (66) and two 3/8” Nut (63).
Step 2 Slide both two Guide Tube (4) into the two Rubber Rings (43) and through the Horizontal Beam (3), secure
them with two 3/8”x19mm Washer (66) and two 3/8”x1” Bolts (59).
Two 3/8”x19mm Washer (66) and two 3/8”x1” Bolt (59) have been attached on the Guiding Tubes, so please separate them,
then follow Step 2 to assemble.
Step 3 Place the nine Weight Stack (31) into the two Guiding Tubes (4).
Step 4 Install Black Fixing Bushing (74) into Selector Bar (32). Let Fixing Pin (70) go through the hole of Black Fixing
Bushing (74) and the first hole of Selector Bar (32), then attach to the bottom part in the hook of Top Plate
(30). Then put Selector Bar (32) into the Weight Stack (31). Attach the Black Washer (69) on the middle hole
of Top Plate (30).
Step 5 Connect the Revolving Part (29) with T-Tube (2), secure them with one 3/8”x1/2” Bolt (60) and one 3/8”x1”
Washer (67).