10254 - 7
Instructions for assembly
• Unpack the carton and using the parts list check that all parts are accounted for.
• Do not dispose of the packaging material until assembly is completed.
• Tools are provided for use in assembly.
4. ASSEMBLY STEPS
STEP 1: FRONT AND REAR STABILISER INSTALLATION
• Attach the Front Stabiliser (2) onto the front curve of the Main Frame (1) with two M8 x 70 Bolts (17), two Ø8 x Ø20
Curved Washers (14) and two M8 Cap Nuts (30).
• Tighten Cap Nuts (30) with the Multi Hex Tool provided.
• Attach the Rear Stabiliser (3) onto the rear curve of the Main Frame (1) with two M8 x 70 Bolts (17), two Ø8 x Ø20
Curved Washers (14) and two M8 Cap Nuts (30).
• Tighten Cap Nuts (30) with the Multi Hex Tool provided.
• The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and “L” for Left.
• Insert the pedal shaft of the Left Foot Pedal (44) into the threaded hole in the Left Crank (39). Turn the pedal shaft by
hand in a counter-clockwise direction until snug.
Note:
DO NOT turn the pedal shaft in the clockwise direction; doing so will strip the threads.
• Tighten the pedal shaft of Left Foot Pedal (44) with the Multi Hex Tool provided.
• Insert the pedal shaft of the Right Foot Pedal (45) into the threaded hole in the Right Crank (39).
• Turn the pedal shaft by hand in a clockwise direction until snug.
Note:
DO NOT turn the pedal shaft in the counter clockwise direction; doing so will strip the threads.
• Tighten pedal shaft of Right Foot Pedal (45) with the Multi Hex Tool provided.
