21
MAINTENANCE
CLEANING
The Trojan Enduro 340 Stationary Cycle can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the Trojan Enduro 340
Stationary Cycle after each use.
Please inspect all assembly bolts and pedals on the machine for proper tightness before use.
STORAGE
Store the Trojan Enduro 340 Stationary Cycle in a clean and dry environment away from children.
PROBLEM
SOLUTION
The upright Bike wobbles when
in use.
Turn the adjustable leveler on the rear stabiliser as needed to level the
upright Bike.
There is no display on the
Console.
1.
Remove the Console and verify the wire that comes from the
Console is properly connected to the wire that comes from the
Main Frame.
2.
Check if the batteries are correctly positioned and that the
battery springs are in proper contact with batteries.
3.
The batteries in the Console may be dead. Change to new bat-
teries.
There is no heart rate reading
or heart rate reading is erratic /
inconsistent.
1.
Make sure that the wire connections for the hand pulse sensors
are secure.
2.
To ensure the pulse readout is more precise, please always hold
the handlebar grip sensors with 2 hands.
3.
Gripping the hand pulse sensors too tight. Try to maintain moder-
ate pressure while holding onto the hand pulse sensors.
Squeaking noise when in use.
The bolts may be loose on the upright Bike, please inspect the
bolts and tighten the loose bolts.
TROUBLESHOOTING
Summary of Contents for Enduro 340
Page 24: ......