Trojan ENDURO 330, User Manual

Page: 11 / 23

11
ASSEMBLY STEPS
STEP 3: FRONT POST ASSEMBLY
Remove 4 Allen Bolts (M8 x 20 mm)
(20) and 4 Curved Washers (ø8.5 x ø20
mm) (34) from the Main Frame (1).
Slide the Front Post (2) through the
Front Cover (52) and connect the Middle
Console Wire (67) from the Front Post
(2) to the Lower Console Wire (68).
Pull the Tension Connector of the
Upper Tension Cable (63) and slide it in-
between the opening on the Connector
Holder on Lower Tension Cable (66). Pull
the Upper Tension Cable upward and
slide the wire through the slot on the
Bracket. Lower the Upper Tension Cable
so the fitting sits firmly on top of
the bracket.
Insert the Front Post (2) into the Main
Frame (1). Secure using 4 Curved Washers
(ø8.5 x ø20 mm) (34) and 4 Allen
Screws (M8 x 20 mm) (20). Move the
Front Cover (52) down into position.
STEP 3
STEP 2: PEDAL ASSEMBLY
Attach the Left and Right Pedal Straps
to the Left and Right Pedals (43, 44).
Note: The end with the 4 adjustable
holes must be set outwards.
Attach the Left and Right Pedals (43, 44)
to the Left and Right Crank Arms (9).
Note: The Pedals and Crank Arms
are marked with R, L. The Right Pedal
(R) should be threaded in a clockwise
direction and the Left Pedal (L) should
be threaded in a counter-clockwise
direction.
STEP 2