BANDING
1. Select BAND option.
2. U se the pen to move the cursor to the required starting
point.
3. Press CTRL key to set 1st.cursor.
4.
You may now PIN POINT cursor by using the CRSR keys.
When cursor is PIN POINTED p ress CTRL to lock
1st.cursor in position.
5. Move 2n d.cursor to required position.
6. Press CTRL key to set 2n d.cursor. Dynamic banding line
will now a p p e a r on screen.
7. You may now PIN POINT 2n d.cursor by using the CRSR
keys.
8. Press CTRL key to lock 2n d .cursor and first line in
bandin g operation will be drawn on the screen.
9. Move the cursor to the third position and follow
instructions 6 to 8 above.
You may carry out the above operation a s often as required.
Press Q key to leave this option and to return to the MAIN
MENU.
RAYS
1. Select RAYS option.
2. U se the pen to move the cursor to the required centre
position of the RAY.
3. P ress CTRL key to set the centre cursor.
4. You may now PIN POINT centre cursor by using the CRSR
keys. When cursor is PIN POINTED press CTRL key to
lock centre cursor.
5. Move 2n d.cursor to required position.
6. Press CTRL key to set 2n d.cursor.
7. You may now PIN POINT cursor by using CRSR keys.
Dynamic bandin g of line will now a pp ear on screen.
When cursor is PIN POINTED press CTRL key to lock
cursor and to draw first line in RAY.
8. Follow instructions 5, 6 & 7 as often as required to build
RAYS.
Press Q key to leave this option and to return to the MAIN
MENU.
LINE
1. Select LINE option.
2. U se the pen to move the 1st.cursor to the point on the
screen where you wish to start line.
3. Press CTRL key to set 1st.cursor.
