AWC7813 motion controller user manual
WWW.SZTROCEN.COM
72
as the corresponding
【
input valid level
】
configuration in the panel.
3.16.4 AutoReset Settings
When you click the
【
Reset
】
button and the laser head does not move, you
need to turn on the power-on reset function. Procedure as follows:
In
interface, click
【
Menu
】 → 【
Manufacturer
Parameters Settings
】→【
AutoReset Settings
】
to turn it on.
Figure3-16-4 Autoreset settings
Table 3-16-4 Power-on reset setting instructions
Name
Function Description
XY AutoReset
Generally it is on. The process of power-on reset is actually the
process of finding the zero point. The X and Y axes drive the
laser head to move in the X- and Y- directions, stop when it
touches the X- and Y- limit switches, and then walk back for a
while Distance, that is, the offset distance of the origin (see
. If you do not enable the function of
