51
7.6.4.5 Record to Storage on Alarm/ Record to Storage Continuously
[Enable]
Enable task.
[Schedule]
Option to choose always or set a particular schedule. Check Schedule setup to select the right
schedule ID for your task.
[Task]
Task function.
Click on the task to login the task setting screen below.
Click
Apply
to confirm your setting
8.
[Record from]--
Select the stream from which it should record. It can be “Primary stream” , “Secondary
stream” and “ Mobile Stream” . For smaller pictures you can select from “Secondary stream” or
“Mobile Stream”.
9.
[Post-recording time]--
The number of seconds that the camera should keep recording video after
motion stops. If there is any motion within this time the camera will keep recording until there is no
motion for the duration of this parameter. It can be from 5 seconds to 24 hours.
10.
[Split duration]--
This specifies the maximum duration of one file. If the recording goes on for longer
than this parameter the camera will split the video into a number of files.
11.
[Record thumbnail]--
Enable or disable thumbnail.
12.
[Image file name] --
Name of file image snap shots are saved to
13.
[Suffix of file name]--
Choose between Sequence number and Date
14.
Click
Apply
to confirm your settings.
