50
7.6.4.4 Snapshot to Storage on Alarm/ Snapshot to Storage Periodically
[Enable]
Enable task.
[Schedule]
Option to choose always or set a particular schedule. Check Schedule setup to select the right
schedule ID for your task.
[Task]
Task function.
Click on the task to login the task setting screen below.
Click
Apply
to confirm your setting
[Snapshot from]
Select snapshot stream source.
[Snapshot duration]
The number of seconds that the camera should keep sending images after motion
stops.
[Snapshot frame rate]
The number of frames per seconds that the camera should keep sending images at
when an alarm is triggered.
[
Alarm Interval]--
Number of seconds for which the camera should stop sending e-mail alerts after the first
set. Setting the time to 0 disables this feature. It allows you to designate a time (in seconds) during which
new pictures are suppressed. For example, if you want to avoid a flood of pictures, you could set this time
to 3600 seconds so that after a motion detection event you wouldn’t get any new pictures for at least 1
hour.
[Image file name]
Name of file image snap shots are saved to
[Suffix of file name]
Choose between Sequence number and Date
Click
Apply
to confirm your settings.
