18
4. Apply the control solution
Remove cap and turn bottle upside down. Squeeze one drop
onto a clean tissue. Wipe bottle tip with tissue and discard
tissue.
Gently squeeze another drop onto a small piece of unused
aluminum foil or clear plastic wrap. Recap control solution
bottle tightly.
Touch the test strip to the top of the control solution
drop.
Do not put control solution on top of the test strip. Wait
for the control solution to be drawn into the test strip.
Hold the test strip to the control solution drop until the
meter beeps and dashes move across the display.
This
means the meter is testing. Remove the test strip from the
control solution drop.
If meter does not beep and begin testing soon after drawing up
sample, discard test strip. Repeat test with a new test strip. If
the problem continues, see
Troubleshooting
section.
Performing a Control Solution Test
(continued)
LB0010
9 JUNE 2023
LB0010
9 JUNE 2023
PetMeterOwnersBooklet_XE4HTK03r1.indd 18
7/27/20 14:48
