19
5. Read your result
The result displays with the control symbol when the
test is complete.
Note:
Removing test strip from the meter before the result
displays cancels the test. An error message appears, and the
result is not stored in memory. Retest with a new test strip and
do not remove before result is displayed.
Compare the result to the control range printed on the test
strip vial label for the control solution level you are using.
If the result is within the range, the system can be used for
testing blood. If the result is outside the range, repeat the test
using a new test strip.
If result is still outside range, do not use the system
for testing blood.
Contact Customer Care for assistance.
After the result is displayed hold the meter with the test
strip pointing down. Press strip release button to release and
discard test strip into a suitable waste container.
LOT R-758
EXP 2023/10/31
1 31-61 mg/dL
2 87-117 mg/dL
3 254-344 mg/dL
X3HTK04 Rev. 1
PETMONITORING
BLOOD GLUCOSE TEST STRIPS
50 Test Strips
Manufactured by: Trividia Health, Inc.
Ft. Lauderdale, FL 33309 U.S.A.
Use only with
Test Buddy
Pet-Monitoring
Meter
Recap vial immediately upon removing
a test strip.
For home and professional/
veterinary clinic use for monitoring blood
glucose samples taken from dogs and cats.
For
in vitro
diagnostic use only. For use
with fresh, capillary or fresh, venous whole
blood samples taken from a dog or cat.
NOT FOR HUMAN USE.
Store in a dry place at room temperature
below 86°F.
DO NOT REFRIGERATE OR
FREEZE.
Read instructions for use
before testing.
Chemical Composition:
Glucose
dehydrogenase-FAD
(Aspergillus species)
,
mediators, buffer, and stabilizers.
Performing a Control Solution Test
(continued)
(Example only)
(Examples only)
Call Customer Care at 1-800-803-6025, Mon.–Fri., 8AM–8PM EST
May 8, 2023
PetMeterOwnersBooklet_XE4HTK03r1.indd 19
7/27/20 14:49
