Triumph XCX Owner'S Handbook Manual Download

Page: 51 / 170

General Information

•

Press and release the SCROLL
button until RidER is displayed in the
lower instrument display, then press
the SET button.

RidER Displayed

MAP Options

Press the SCROLL button and choose
one of the available MAP options:

•

Rain

•

Road

•

Sport

•

Off Road.

Rain Option Shown

Press the SET button to confirm your
selection.

ABS is now visible in the display screen.

ABS Options

Press the SCROLL button and choose
one of the available ABS options:

•

Road

•

Off Road

•

Off.

Road Option Shown

Press the SET button to confirm your
selection.

TTC is now visible in the display screen.

Warning

If the ABS is disabled, the brake
system will function as a non-ABS
braking system. In this situation
braking too hard will cause the wheels
to lock, and may result in loss of
motorcycle control and an accident.

Summary of Contents for XCX











































































































































































Search results

Summary of Contents for XCX

Reviews:

Related manuals for XCX

Brands by name

Popular brands

Triumph XCX, Owner'S Handbook Manual

Search results

Summary of Contents for XCX

Reviews:

Related manuals for XCX

Brands by name

Popular brands