Triumph XCX, Owner'S Handbook Manual

Page: 49 / 170

General Information
49
Note:
• It is not possible to select the RIDER
Mode whilst the motorcycle is in
motion if ABS and/or TTC are set to
Off when setting the RIDER Mode
options (see page
50 ).
Press and release the MODE button on
the instrument housing until the desired
riding mode is flashing in the display.
1. MODE button
2. Selected riding mode (flashing)
3. Current (active) riding mode
Note:
• The selected riding mode is
automatically activated when the
following conditions are met:
Within 30 seconds of pressing the MODE
button the rider must carry out the
following simultaneously:
• Close the throttle
• Pull the clutch in
• Ensure that the brakes are not
engaged (allow the motorcycle to
coast).
Once the MAP, ABS and TTC settings
have changed, the selected riding mode
will be displayed and the previous mode
will no longer be visible.
1. Selected riding mode
Resume riding as normal.
Note:
• If any one of the systems (MAP, ABS
or TTC) fails to change to the
settings specified by the selected
riding mode, both the previous and
the selected riding mode icons will
flash.
1. Incomplete mode change (flashing)
2
3
1
1
1