background image

General Information

30

If the indicator light remains on it
indicates that the immobilizer has a
malfunction that requires investigation.
Contact an authorized Triumph dealer as
soon  as  possible  to  have  the  fault
checked and rectified.

Triumph Traction Control (TTC) 
Disabled Warning Light

The TTC disabled warning light
will illuminate when the RIDER
Mode is selected with TTC set
to Off (see page

47

);

TTC set to Off – the warning light is
illuminated.

TTC set to Road or Off Road – the
warning light is off.

If the warning light becomes illuminated
at any other time while riding, it
indicates that the TTC has a malfunction
that requires investigation.

1.

Traction control disabled warning 
light

Triumph Traction Control (TTC) 
Indicator Light

The TTC indicator light is used
to indicate that the traction
control system is active and is
working to limit rear wheel slip

during periods of hard acceleration or
under wet or slippery road conditions.

TTC Indicator Light Operation:

ROAD or RIDER Mode selected with TTC 
set to Road:

Under normal riding conditions the
indicator light will remain off.

The indicator light will flash rapidly
when the traction control system is
working to limit rear wheel slip
during periods of hard acceleration
or under wet or slippery road
conditions.

OFF ROAD or RIDER Mode selected with 
TTC set to Off Road:

Under normal riding conditions, the
indicator light will flash slowly to
indicate that the TTC system is set
to Off Road.

The TTC indicator light will flash
rapidly when the traction control
system is working to limit rear wheel
slip during periods of hard
acceleration or under wet or slippery
road conditions.

RIDER Mode selected with TTC set to Off:

The indicator light will not illuminate.
Instead the TTC disabled warning
light will be illuminated (see page

30

).

For full details on ROAD, OFF ROAD and
RIDER Modes, see Riding Modes on
page

45

.

TC

TC

TC

1

TC

Summary of Contents for Tiger XCX













































































































































































Reviews: