Triumph Tiger XCX, Owner'S Handbook Manual

Page: 52 / 172

General Information
52
Note:
• If the mode icons are not visible
when the ignition switch is in the ON
position, ensure the engine stop
switch is in the RUN position.
Setting the RIDER Mode Options
Note:
• During setup, ABS and TTC can be
activated or de-activated in the
RIDER Mode.
• If the RIDER Mode is currently
selected, changes to the MAP, ABS
and TTC systems will become
immediately active.
• If the ROAD or OFF ROAD Modes are
selected the RIDER settings will not
become active until the RIDER Mode
is selected (see page
48 ).
To set the RIDER Mode options; with the
motorcycle stationary and in neutral,
turn the ignition to the ON position.
• Press and hold the MODE button on
the instruments until MAP is visible
in the display screen.
or alternatively:
• Press and release the SET button on
the left hand switch housing until
SEtUP is visible in the display screen.
• Press and release the SCROLL
button until RidER is displayed in the
lower instrument display, then press
the SET button.
RidER Displayed
MAP Options
Press the SCROLL button and choose
one of the available MAP options:
• Rain
• Road
• Sport
• Off Road.
Rain Option Shown
Caution
The engine should not be stopped by
turning the ignition switch to the
OFF position when the motorcycle is
moving. The engine stop switch is for
emergency use only. Stopping the
engine when the motorcycle is moving
may cause damage to motorcycle
components leading to loss of
motorcycle control and an accident.