Triumph Tiger XCX, Owner'S Handbook Manual

Page: 60 / 172

General Information
60
Right Handlebar Switches
1. Engine stop switch
2. Starter button
3. Cruise control adjust button
4. Cruise control ON/OFF button
Engine Stop Switch
In addition to the ignition switch being
turned to the ON position, the engine
stop switch must be in the RUN position
for the motorcycle to operate.
The engine stop switch is for emergency
use. If an emergency arises which
requires the engine to be stopped, move
the engine stop switch to the STOP
position.
Note:
• Although the engine stop switch
stops the engine, it does not turn off
all the electrical circuits and may
cause difficulty in restarting the
engine due to a discharged battery.
Ordinarily, only the ignition switch
should be used to stop the engine.
Warning
For reasons of security and safety,
always move the ignition switch to the
OFF position and remove the key
when leaving the motorcycle
unattended.
Any unauthorized use of the
motorcycle may cause injury to the
rider, other road users and
pedestrians and may also cause
damage to the motorcycle.
Warning
With the key in the LOCK or P position
the steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is
moving as this will cause the steering
to lock. Locked steering will cause loss
of motorcycle control and an accident.
chdc_1
4
RES /+
SET /-
2
3
1