background image

67

Accessories, Loading and Passengers

ACCESSORIES, LOADING AND PASSENGERS

The addition of accessories and carrying of additional weight can affect the motorcycle's
handling characteristics causing changes in stability and necessitating a reduction in speed. The
following information has been prepared as a guide to the potential hazards of adding
accessories to a motorcycle and carrying passengers and additional loads.

Warning

Incorrect loading may result in an unsafe
riding condition leading to an accident.

Always ensure any loads carried are evenly
distributed on both sides of the motorcycle.
Ensure that the load is correctly secured
such that it will not move around while the
motorcycle is in motion.

Always check the load security regularly
(though not while the motorcycle is in
motion) and ensure that the load does not
extend beyond the rear of the motorcycle.

Never exceed the maximum vehicle
loading weight of:

 485 lb (220 kg) for Thunderbird 
LT.

511 lb (232 kg) for Thunderbird
Commander.

This maximum loading weight is made up
from the combined weight of the rider,
passenger, any accessories fitted and any
load carried.

Warning

Do not install accessories or carry luggage
that impairs the control of the motorcycle.
Make sure that you have not adversely
affected any lighting component, road
clearance, banking capability (i.e. lean
angle), control operation, wheel travel,
front fork movement, visibility in any
direction, or any other aspect of the
motorcycle's operation.

Summary of Contents for Thunderbird Commander









































































































































Reviews: