Triumph Thunderbird Commander, Owner'S Handbook Manual

Page: 120 / 136

120
Maintenance and Adjustment
Cleaning of the Exhaust System
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance. These
instructions can be applied to chrome,
brushed stainless steel and carbon fiber
components alike.
Note:
• The exhaust system must be cool
before washing to prevent water
spotting.
Washing
Prepare a mixture of cold water and mild
automotive cleaner. Do not use a highly
alkaline soap as commonly found at
commercial car washes because it leaves a
residue.
Wash the exhaust system with a soft cloth. Do
not use an abrasive scouring pad or steel
wool. They will damage the finish.
Rinse the exhaust system thoroughly.
Ensure no soap or water enters the exhausts.
Drying
Dry the exhaust system as far as possible with
a soft cloth. Do not run the engine to dry the
system or spotting will occur.
Protecting
When the exhaust system is dry, rub
'Motorex 645 Clean and Protect' into the
surface.
It is recommended that regular protection be
applied to the system as this will both protect
and enhance the system's appearance.
Warning
Never attempt to clean the windshield
while the motorcycle is in motion as
releasing the handlebars may cause loss of
vehicle control and an accident.
Operation of the motorcycle with a
damaged or scratched windshield will
reduce the rider's forward vision. Any such
reduction in forward vision is dangerous
and may lead to an accident causing injury
or death.
Caution
Corrosive chemicals such as battery acid
will damage the windshield. Never allow
corrosive chemicals to contact the
windshield.
Caution
The use of products containing silicone will
cause discoloration of the chrome and
must not be used. Similarly, the use of
abrasive cleaners will damage the system
and must not be used.